Troubleshooting Polaris Code 520207: A Comprehensive Guide

Throughout your Polaris vehicle’s life, you may encounter a range of error codes on the dashboard. One of these could very well be the Polaris Code 520207. Such error codes, while intimidating at first, are designed to help you diagnose potential problems with your vehicle. Today we dive deep into lending you a clearer understanding of what constitutes the Polaris Code 520207.

What is the Polaris Code 520207?

Polaris Code 520207 is an error code associated with the electronic power steering (EPS) of a Polaris vehicle. The EPS system is a crucial component in modern vehicles, providing assistance and making steering less laborious for the driver.

When your vehicle’s dashboard highlights Polaris Code 520207, it’s an indication that the EPS has encountered a fault or malfunction. Here, the number ‘7’, the last digit in the error code, signifies a stuck-on fault where the EPS motor, controller, or wiring has a sustained issue. Such an EPS problem can make steering tedious and may present safety hazards.

Decoding Polaris Code 520207

To understand the code, it’s essential to dissect the series of numbers which adhere to a specific criteria, as outlined by Polaris.

Understanding the code structure

This particular 6-digit code consists of three crucial parts, all of which provide unique information about the vehicle’s EPS fault. The first two digits, ’52’, define the module that is sending the error message. In this case, ‘52’ stands for ‘EPS Unit.’

The next two digits, ’02’, refer to the error message’s priority. Here, ‘02’ signifies that the issue should be addressed urgently, but not immediately. The crux of the problem lies within the last two digits of the error code, ’07’, which specify the actual fault.

Issues Causing Polaris Code 520207

A variety of problems can trigger Polaris Code 520207. These malfunctions could range from simple issues such as a loose connection to more complicated problems like EPS module malfunction.

1. Wiring Problems

Often, Polaris Code 520207 is the outcome of loose or damaged wiring within the EPS. It could be that wires connected to the EPS motor or controller are either disconnected or frayed.

2. EPS Controller Issues

The EPS controller, which converts the vehicle’s battery power into a form that the EPS motor can use, may malfunction and throw the error code.

3. Faults in the EPS Motor

The EPS motor, responsible for initiating power to make the steering less strenuous, might also be the culprit behind the code.

Solving Polaris Code 520207

Addressing the Polaris Code 520207 involves methodically troubleshooting potential issues associated with the EPS unit. It requires conducting a step-by-step inspection of all EPS related parts.

1. Checking the Wiring

Inspect the wiring connections. Look for any disconnected, tangled, or damaged wires. If you find any, correct them, and then test the vehicle again to see if the error code persists.

2. Inspecting the EPS Controller

Check the EPS Controller for any visible damage or signs of malfunctioning. If it shows signs of malfunction, consider getting professional assistance to repair or potentially replace the unit.

3. Investigating the EPS Motor

Lastly, the EPS Motor should be checked for any visible problems. Any anomalies could indicate that the motor is at fault and may need to be repaired or replaced.

Maintaining the Polaris EPS

To avoid the occurrence of Polaris Code 520207 or similar codes, conduct regular EPS maintenance. Regular inspections of the aforementioned components can ensure your vehicle’s EPS stays in top shape and functions smoothly.

By gaining an understanding of Polaris Code 520207, you can better maintain the health of your vehicle’s EPS system and ensure a safer, smoother ride.

Frequently Asked Questions

1. How do I reset Polaris error code?

To reset the error code on your Polaris vehicle, follow these steps:

– Locate the digital wrench icon on your instrument cluster.

– Press and hold the mode/reset button until the wrench icon starts flashing.

– Release the button and quickly press and hold it again.

– The display will show a series of error codes. Wait until “SPn” appears.

– Release the button, and the error codes will be cleared, resetting the system.

2. What does driver circuit open grounded mean?

The error code “driver circuit open grounded” on your Polaris vehicle typically indicates an issue with the electrical circuitry. It refers to a problem with the electronic components that control a specific system. This may include a faulty wire, disconnected connection, or damaged sensor. It is advisable to consult a certified Polaris technician to diagnose and fix the issue.

3. How do I read my Polaris engine code?

To read the engine code on your Polaris vehicle, you can use the digital wrench tool or follow these steps:

– Turn the ignition key to the ON position without starting the engine.

– Use a paperclip or a similar tool to bridge the two-pin connector on the diagnostic plug located under the seat.

– The check engine light will start flashing, indicating a series of two-digit numbers. Count the number of blinks to determine the engine code.

– Refer to the Polaris service manual or contact your Polaris dealer to interpret the specific engine code.

4. What is error code 29 on Polaris?

Error code 29 on a Polaris vehicle refers to a throttle position sensor (TPS) out of range condition. It indicates a problem with the throttle position sensor, which measures the angle of the throttle plate. This error code may be triggered by a faulty sensor or a wiring issue. It is recommended to seek professional assistance to diagnose and resolve the problem.

Scroll to Top